Importer des sons dans le PC3k ?

[zoti]

Salut à tous
Je n'arrive pas à importer des sons dans la becanne.
Quelqu'un pourrait il m'aider.
Pour info, j'ai lu la notice du PC3.
Merci d'avance.

[regg]

Dans la doc de ton PC3K, regarde le mode STORAGE, et LOAD PAGE.
Si c'est comme sur le PC3, Tu places les fichiers dans le répertoire ouvert du PC lors de la connexion USB, et ensuite tu les selectionnes en mode storage.
Les formats .PC3 et .PC3K sont les extensions standards. Pour importer des samples, il te faut des formats .wav ou .aif.

Pressing the LOAD soft button calls up the LOAD page (see below,) where you can load groups
of objects from .P3K, .PC3, .K26, .K25, or .KRZ files, individual objects from within those files, a
MIDI sequence file or files (.MID), as well as .WAV and .AIF audio samples from the current
storage device (see below for details.)

Loading .WAV and .AIF Audio Files
From the LOAD page, .WAV and .AIF audio files can be loaded and used with user created
keymaps (see Building a Keymap on page 14‐7 and Editing Samples on page 14‐9.) Mono and
stereo files can be loaded, 8 or 16 bit, with sample rates up to a maximum of 96000 Hz. Once
samples are loaded to the PC3K’s user sample flash memory, samples remain in the PC3K even
when the power is off, until they are manually deleted. Also, once samples are loaded to the
PC3K’s user sample flash memory, there is no load time for those user samples when turning on
the PC3K.
To load a user audio file or files, select one or more .WAV or .AIF files from the LOAD page file
list and press the OK soft button. You will be prompted to choose a bank (group of 128 ID
numbers) to load the sample in to. Use the Alpha Wheel or ‐/+ buttons choose from the list of
banks. It is recommended to load into the first user bank (1025...1152), this makes it easier to find
your sample later on in the Sample list. Next, choose one of the loading method soft buttons (see
Loading Methods on page 13‐11 for details.) Generally you will want to use the Fill soft button to
load the sample into the selected bank. This uses the Fill loading method, which loads the
sample into the lowest available ID#, starting in the chosen bank. Any existing samples will not
be overwritten. Press the desired soft button to begin loading. Samples load slowly, please be
patient. You can cancel loading a sample by pressing the Cancel soft button. On the EditKeymap
page (see The Keymap Editor on page 14‐1) loaded audio samples can be selected in the Sample
field. On the EditKeymap page you can find an audio file with the highest ID# by selecting the
Sample field, entering 0 on the alphanumeric

[zoti]

J'arrive à entrer mes sons ca c 'est bon.
Le probleme c 'est qu il n apparaissent pas avec l 'editeur sur l'ordi. Est ce normal?