merci du tuyau..
Annonce
Réduire
Aucune annonce.
Comment synchroniser un Elektron Analog Keys et un Roland TR8 ?
Réduire
X
-
Mangalore
Envoyé par Mangalore Voir le messagequelqu'un sait comment je peux synchroniser le séquenceur de mon AK pour que quand je presse play il lance le séquenceur de la TR et idem sur "stop?
merci du tuyau..
-
Invité
Tout d'abord, je ne posséde aucune des deux machines que tu évoques.
Après avoir regardé les deux machines sur Internet, je pense qu'il te faut passer par le MIDI.
AK MIDI OUT>>>>>Cable MIDI>>>>>TR8 MIDI IN
Ensuite, dans les paramètres MIDI de chaque mahine, il faudrait que tu sélectionnes MASTER pour l'AK et SLAVE pour la TR8.
Il doit y avoir ensuite un paramètre MIDI pour définir la SYNC CLOCK (ou SEND CLOCK....Un truc dans le genre) sur l'AK. Puis sur la TR8, tu as le choix entre EXTERNAL(parfois, c'est mentionné MIDI) ou INTERNAL. Tu choisis EXTERNAL.
Mes connaissances en MIDI sont très limitées, et quand j'ai réalisé toute ma chaîne MIDI, c'est plus par tâtonnements(et avec l'aide de certains forumeurs) que j'ai pu y arriver. Ce qui veut dire que mon message est loin d'être parole d'évangile.
Bon courage.
Commentaire
-
Mangalore
Envoyé par Foreverchild Voir le messageTout d'abord, je ne posséde aucune des deux machines que tu évoques.
Après avoir regardé les deux machines sur Internet, je pense qu'il te faut passer par le MIDI.
AK MIDI OUT>>>>>Cable MIDI>>>>>TR8 MIDI IN
Ensuite, dans les paramètres MIDI de chaque mahine, il faudrait que tu sélectionnes MASTER pour l'AK et SLAVE pour la TR8.
Il doit y avoir ensuite un paramètre MIDI pour définir la SYNC CLOCK (ou SEND CLOCK....Un truc dans le genre) sur l'AK. Puis sur la TR8, tu as le choix entre EXTERNAL(parfois, c'est mentionné MIDI) ou INTERNAL. Tu choisis EXTERNAL.
Mes connaissances en MIDI sont très limitées, et quand j'ai réalisé toute ma chaîne MIDI, c'est plus par tâtonnements(et avec l'aide de certains forumeurs) que j'ai pu y arriver. Ce qui veut dire que mon message est loin d'être parole d'évangile.
Bon courage.
Commentaire
-
Bonsoir,
est ce que la TR peut etre synchronisées, au moins ?
j'ai, trouvé cela : http://www.elektronauts.com/topics/v...5/page:1#69355
"you can sequence external gear via CV but not midi. You can do exactly as you wish provided the korg accept 1v/oct (or hz/oct) etc. I thought the korgs only had clock cv, but maybe I'm wrong."
suivi de
"the analog four and keys can sequence external gear via CV only. you can sync external gear using MIDI, but that is it as far as the MIDI control goes. for the CV control, you can send pitch information (either V/octave or Hz/V), triggers, gates, and LIN values, all depending on what you are trying to accomplish with the external gear. see the manual describing the CV outputs.
with your example, the volca keys supports two ways of external control. the first is MIDI in, which supports both pitch information and syncing. the other way is via it's sync inputs and outputs, but these (as their name suggests) is only for syncing clocks and not for accepting or sending pitch information via CV. so with the analog four or keys, you would only be able to sync the clock on the keys to the analog four or keys and not send pitch or sequence information."
je kroa ke c mort pour sync midi, même si dans les spécifications de la machine il est ecrit qu'il il y a une possibilite de synchro via dyn midi outputDernière modification par nemo21, 04 novembre 2014, 20h54.
Commentaire
-
Bon alors ...
dans le manuel.....
aller dans " GLOBAL MENU " descendre jusqu'à
MIDI SYNC et
"
Controls how Analog Keys receives and sends MIDI clock and transport commands. Change settings by using
the [LEFT]/[RIGHT] arrow keys.
CLOCK RECEIVE will when active make Analog Keys respond to MIDI clock sent from external
devices.
CLOCK SEND will when active make Analog Keys transmit MIDI clock.
TRANSPORT RECEIVE will when active make Analog Keys respond to system realtime messages
like play, stop, continue and song position pointer.
TRANSPORT SEND will when active make Analog Keys send out system realtime messages
like play, stop, continue and song position pointer.
PRG CH RECEIVE will when active make Analog Keys respond to incoming program change
messages, which is useful when wanting to select patterns externally. The MIDI channel that
will listen to incoming program change messages is set in the MIDI CHANNELS menu, covered
on page 50.
PRG CH SEND will when active send program change messages when patterns are changed.
The MIDI channel that will send program change messages is set in the MIDI CHANNELS
menu, covered on page 50 "
Commentaire
Commentaire