- Set both oscillators to an appropriate level (115, 110) ; cela veut-il dire que l'osc 1 doit être réglé à 115 Hz et le 2 à 110 Hz ?
- Set osc 1 to sawtooth wave and distort it a little bit (40) ; la distorsion sera valable pour les deux osc, non ?
- Set osc 2 to sawtooth and sync it to osc 1 ;
- Tune it an octave higher and add some detuning (25) ; c'est le son en lui-même qu'on monte d'une octave ou qu'un seul osc ?
- Lower the sound down a couple of octaves ;
- OK, let's fatten the sound by setting it to unison, multi-trigger mode... ; multi-trigger : Si on n'a pas de bouton intitulé de la sorte, faut-il tout simplement activer tous les boutons trigger ?
- … and detune it a bit (5) ; on detune quoi au juste ? Là, je suis largué !
- Set the 24 dB LPF to a lower cutoff (53) and add a little bit of resonance (8) ; sur mon synthé, la fréquence max est 44,6960. Est-ce habituel ou n'ai je rien compris ?
- Also increase filter EG intensity (30) and key track (37) ; Alors là, je ne me rappelle pas avoir vu flitre EG quelque part dans le tuto ! Qu'es aquò ?
- Set the filter EG for a fast attack before decaying to a lower sustain level (0, 105, 30, 100) ; Là encore, j'ai un piti problème ; quels réglages effectuer quand on a une enveloppe AD1D2SR1R2 ? On met les mêmes valeurs à D1 & D2 et à R1 & R2 ?
- The amplitude EG is similar with fast attack and slower decay and release (0, 40, 85, 85) ;
- Add some chorus or flanger (FLG, 26, 20) ; FLG c'est bien l'abbréviation de flanger ?
- Equalize the sound with about 3 dB gain at 480 Hz and 2 dB at 7 kHz ; ça me parle chinois tout ça.
- Finally, patch the signal from the filter EG to osc 2 tuning to get a sync sweep (FEG, 2 tn, 50). FEG, c'est quoi ? 2 tn, c'est quoi aussi ?
D'avance, je remercie la(les) personne(s) qui m'apportera(ont) son(leur) aide pour avancer là dedans. J'ai l'impression d'être un gros boulet.
Commentaire